广告
首页 > automotive-testing > 正文
Calspan opens 5,500m² crash test center in New York, USA
2019-09-05 14:27:41· 作者：RACHEL EVANS
The independent test laboratory Calspan in Buffalo, New York, has opened a new crash test center and chose Messring to equip the facility.
The independent test laboratory Calspan in Buffalo, New York, has opened a new crash test center and chose Messring to equip the facility.
The new, fully enclosed and highly secure indoor crash test center has multiple modern crash halls and large photo pits. It features two separate points of impact in a space measuring 5,500m², which means that two different types of crash test can be performed simultaneously. In addition, the two areas are separated so that different manufacturers can test at the same time in total secrecy.
Messring provided the bulk of equipment, following its partnership with Calspan that was announced in September 2017. Messring’s MicroTrack track rail system, propulsion system and photo pit frames enable precise and accurate execution of crash tests.
MicroTrack’s key benefit is that the guide channel or rail is thinner than conventional systems, allowing for the capture of more detailed crash footage from the film pit below. The nearly zero-clearance system between the MicroTrack and the vehicle tow trolley also improves control over test vehicles, including their speed and point of impact. Drive is provided by an electric motor capable of 1600bhp, which is good for a maximum speed at the Buffalo facility of 120km/h.
The facility is designed to accommodate all current test configurations and is already equipped for a host of possible future test scenarios. In its current configuration, up to 500 test runs can be carried out each year. Additional crash tests can be conducted in the existing outdoor facility.
To guarantee security and confidentiality, all laboratory doors are badge-access controlled and monitored 24/7. In addition, the facility’s crash halls and test vehicle preparation areas are separated in order to keep customers and test articles isolated. As a result, vehicles from different manufacturers can be tested at the same time, all while maintaining utmost secrecy.
The new, fully enclosed and highly secure indoor crash test center has multiple modern crash halls and large photo pits. It features two separate points of impact in a space measuring 5,500m², which means that two different types of crash test can be performed simultaneously. In addition, the two areas are separated so that different manufacturers can test at the same time in total secrecy.
Messring provided the bulk of equipment, following its partnership with Calspan that was announced in September 2017. Messring’s MicroTrack track rail system, propulsion system and photo pit frames enable precise and accurate execution of crash tests.
MicroTrack’s key benefit is that the guide channel or rail is thinner than conventional systems, allowing for the capture of more detailed crash footage from the film pit below. The nearly zero-clearance system between the MicroTrack and the vehicle tow trolley also improves control over test vehicles, including their speed and point of impact. Drive is provided by an electric motor capable of 1600bhp, which is good for a maximum speed at the Buffalo facility of 120km/h.
The facility is designed to accommodate all current test configurations and is already equipped for a host of possible future test scenarios. In its current configuration, up to 500 test runs can be carried out each year. Additional crash tests can be conducted in the existing outdoor facility.
To guarantee security and confidentiality, all laboratory doors are badge-access controlled and monitored 24/7. In addition, the facility’s crash halls and test vehicle preparation areas are separated in order to keep customers and test articles isolated. As a result, vehicles from different manufacturers can be tested at the same time, all while maintaining utmost secrecy.
广告 编辑推荐
最新资讯
-
线下培训 | Adams-Marc联合仿真&MSC Nastra
2025-06-06 08:56
-
设计仿真 | 基于ODYSSEE人工智能CDC模型集
2025-06-06 08:55
-
基于TSP脚本的2450脉冲输出实现
2025-06-06 08:35
-
标准解读 | 强制性国家标准《汽车侧面碰撞
2025-06-06 08:35
-
车载信息娱乐系统的TARA分析
2025-06-06 08:20
